Release time:2023-11-12 15:33:43 Hits: Current position: Home > News
This article mainly introduces:
Turkmenistan hydraulic cylinder,steering cylinder manufacturer,steering cylinder(Turkmenistan steering cylinder,produced by Hengyu Hydraulic Cylinder Factory)
steering cylinder are widely used in Turkmenistan,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed steering cylinder for customers from Turkmenistan.
The oil steering cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.
The internal leakage of the steering cylinder should be prevented when the steering cylinder is used. The internal leakage of steering cylinder includes the leakage caused by excessive wear of steering cylinder block seal, piston rod and seal cover seal and piston seal. The cause of sealing leakage between the piston rod and the seal cover is that the seal is wrinkled, squeezed, torn, worn, aging, deterioration, deformation, etc., and a new seal should be replaced at this time.
When the piston speed of the steering cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the steering cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.
When the steering cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the steering cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.
What is the rated pressure of the general cylinder?
This depends on the model of the cylinder, 1. The rated pressure of the light tie rod cylinder is 7 series 7MPa and 14 series 14MPa. 2. Rated pressure of engineering cylinder 16MPa. 3. Rexroth type metallurgical cylinder rated pressure 250MPa.
The diameter of the cylinder is 180mm and the pressure is 14mpa. How many tons can the cylinder hold?
Calculate the area of the cylinder, 3.14*9*9=254.34 square centimeters, take the approximate number of engineering, 1 mpa pressure is about 10 kg per square centimeter, 14 mpa pressure is 140 kg per square centimeter, that is 254.34*140=35607.6 kilograms, it can be known that the cylinder can be about 35 tons in theory.