Release time:2023-11-27 15:08:40 Hits: Current position: Home > News
This article mainly introduces:
Kenya hydraulic cylinder,self-locking hydraulic cylinder manufacturer,self-locking hydraulic cylinder(Kenya self-locking hydraulic cylinder,produced by Hebei Hengyu company)
self-locking hydraulic cylinder are widely used in Kenya,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed self-locking hydraulic cylinder for customers from Kenya.
The oil self-locking hydraulic cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.
The viscosity of the working oil used in the self-locking hydraulic cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.
Regular maintenance of the self-locking hydraulic cylinder includes: regular tightening, self-locking hydraulic cylinder fastening screws and gland screws, self-locking hydraulic cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the self-locking hydraulic cylinder once a year. Clean regularly, the self-locking hydraulic cylinder is cleaned every other year, and the seals are replaced while cleaning.
The definition of the minimum stable speed refers to the minimum movement speed of the self-locking hydraulic cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the self-locking hydraulic cylinder that undertakes different work has different requirements for the minimum stable speed.
How many boom cylinders, bucket rod cylinders and bucket cylinders are there in a small single-bucket excavator?
one for bucket, one for forearm, only one piece for a small excavator under the big arm, two pieces for medium and large excavator.
How to judge the leakage in the cylinder?
Common judgment method: In the production site, people make full use of watching, listening, smelling, touching and other sensory ways, by observing that the cylinder can not move or delay the action or feel the oil temperature change, vibration and noise, etc., and then judge whether the cylinder has internal leakage according to experience. Another method commonly used in the field is to extend the cylinder in place to ensure that the cylinder does not have any load and will not retract (to prevent the cylinder from internal leakage accidents), turn off the machine, and then remove the tubing with the rod cavity, and then press the switch that pulls out the cylinder (do not press the wrong switch). If the oil nozzle with the rod cavity drains the cylinder internally, If there's no oil coming out, you have to think about something else going wrong.