This article mainly introduces:

Vietnam hydraulic cylinder,automobile tailboard cylinder manufacturer,automobile tailboard cylinder

(Vietnam automobile tailboard cylinder,produced by Hengyu Hydraulic Co., Ltd）

automobile tailboard cylinder are widely used in Vietnam，because of excellent fatigue and impact resistance，no need for deceleration device，long service life.So our company has designed automobile tailboard cylinder for customers from Vietnam.

Introduction to automobile tailboard cylinder:

The "O" ring can be used as an auxiliary seal inside the automobile tailboard cylinder, and the elastic force of the "O" ring makes the sealing slip ring close to the sealing surface, generating sealing pressure to achieve sealing. When the internal hydraulic pressure increases, the "O" ring will further deform and squeeze the slip ring, thereby increasing the sealing pressure and improving the sealing performance. The structure has the characteristics of low friction coefficient, good wear resistance, automatic compensation for wear and absorption of hard particles in the automobile tailboard cylinder, and can be completely sealed.

Do not enter foreign bodies when installing the automobile tailboard cylinder block. The place where the installation operation is carried out, the conditions are not good, and foreign bodies can be entered unconsciously. Therefore, the installation site must be cleaned up around, especially the place where the parts are placed must be cleaned, so that there is no dirt.

automobile tailboard cylinder piston rod material selection and requirements: ① piston rod is usually made of 45 steel. When there is a large impact force and heavy load transmission, it is made of 40Cr steel. This is to ensure that the piston rod has sufficient working strength. The piston rod is generally designed as a automobile tailboard cylinder, if the diameter is larger, the hollow piston rod can be used. Made of No. 45 seamless steel pipe. ③ When the piston rod is manufactured, the blank should be first forged and conditioned after mechanical rough processing, and the hardness of HB=230 ~ 250. The purpose of conditioning is to improve the machining performance and increase the working strength of the material. ④ The surface roughness Ra of the piston rod after finishing should not be greater than 0.65μm. ⑤ In order to improve the corrosion resistance of the piston rod, the working surface of the rod can be plated with hard chromium. ⑥ The piston rod and the end cap are guided by H8 ' automobile tailboard cylinder piston rod industry standard: piston rod diameter series of national recommended standard GB/T2348-1993. Piston rod thread size series standard GB/T2350-1980. Please refer to execute. There is no industry standard for piston rods Both the automobile tailboard cylinder and the hydraulic motor are devices that convert the pressure energy of the liquid into mechanical energy and output it. The automobile tailboard cylinder mainly outputs linear motion and force. The automobile tailboard cylinder has a variety of forms, according to the different characteristics of its mechanism it can be divided into piston type, plunger type and swing type three categories, according to the mode of action he can be divided into single action and double action. Piston automobile tailboard cylinder, plunger automobile tailboard cylinder is mainly used for: machinery, such as excavators; Scientific research, such as university structure laboratory. The plunger automobile tailboard cylinder is used for pressure testing machines, such as Jinan test, and the test machine is used for material testing.

The advantages and disadvantages of the automobile tailboard cylinder: the surface of the automobile tailboard cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the automobile tailboard cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about automobile tailboard cylinder:

A hydraulic system functions three cylinders to maintain pressure, what components need to be used?
Two way cartridge valve can be selected for control. Two way cartridge valve advantages: 1) flow capacity is large, especially suitable for large flow occasions. 2) The spool has sensitive action and strong anti-clogging ability. 3) Good sealing, small leakage, oil flow through the valve pressure loss is small. 4) Simple structure, easy to standardize.

How do hydraulic equipment and hydraulic cylinders maintain a certain pressure after pressing to a certain position?
There are several methods. 1. You can use a constant pressure variable pump to adjust the control pressure of the pump to the pressure required by the cylinder, so that when the cylinder is in place, the pump uses the minimum flow rate to maintain the pressure, and the system is more energy saving. 2. If the pressure is maintained for a short time, a hydraulic control check valve can be added to the oil inlet end of the cylinder to close the cylinder and maintain the pressure. If the volume of the cylinder is large, an accumulator can be added between the valve and the cylinder to maintain pressure for 10-30 minutes. 3. You can add a small flow pump, the large pump after unloading, the small pump has been running, specifically for maintaining pressure.