Release time:2023-11-15 10:42:00 Hits: Current position: Home > News
This article mainly introduces:
Tanzania hydraulic cylinder,supporting cylinder manufacturer,supporting cylinder(Tanzania supporting cylinder,produced by Hengyu Hydraulic Co., Ltd)
supporting cylinder are widely used in Tanzania,because of smooth movement,excellent fatigue and impact resistance,high work efficiency.So our company has designed supporting cylinder for customers from Tanzania.
Analysis of commonly used seals: The wear ring and slip ring commonly used on the supporting cylinder are generally made of polytetrafluoroethylene + graphite, because pure polytetrafluoroethylene is easy to produce plastic creep, which is only suitable for low pressure and low wear resistance conditions. If the sealing ring used is a composite material formed after adding graphite filler, the performance can be effectively improved, the ability to resist plastic creep is increased by 2 to 3 times, the initial deformation caused by the load is reduced by 30 to 60% : the rigidity is increased by 2 to 3 times: the dimensional stability under heat is increased by 2 times, and the hardness is increased by l0 to 15%.
The supporting cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.
When the supporting cylinder is in use, once the seal and guide support ring are found to be defective, the seal with the same structural form and appropriate material should be replaced according to the structural form of the supporting cylinder seal to be repaired, so as to minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the seal.
Do not regularly check the damage of the chrome layer of the supporting cylinder: completely extend the supporting cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the supporting cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the supporting cylinder seal. Welding slag is strictly prohibited on the surface of the supporting cylinder.
What material should be selected to seal the cylinder?
The choice of material for sealing is related to the working environment, strength, and medium of your equipment.
What is the difference between single acting hydraulic cylinder and double acting hydraulic cylinder?
Single action hydraulic cylinder is a single direction force work, the return of the plunger depends on itself or the weight of the mechanism to return. The double acting hydraulic cylinder is mainly different from the extension and retraction of the piston (the thrust and tension of the saying), which are all operated by the action of liquid pressure.