Release time:2023-11-12 15:31:04 Hits: Current position: Home > News
This article mainly introduces:
Nigeria hydraulic cylinder,baling press cylinder manufacturer,baling press cylinder(Nigeria baling press cylinder,produced by Hengyu Hydraulic Cylinder Factory)
baling press cylinder are widely used in Nigeria,because of long service life,smooth movement,high work efficiency.So our company has designed baling press cylinder for customers from Nigeria.
At the rated pressure, the thrust of the baling press cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the baling press cylinder is related to the diameter of the baling press cylinder, but not to the stroke of the baling press cylinder. Moreover, the larger the baling press cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the baling press cylinder.
baling press cylinder and hydraulic station selection: Select the type and structure of the baling press cylinder according to the operation requirements of the main engine. According to the external load force borne by the baling press cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the baling press cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the baling press cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the baling press cylinder, the diameter of the piston and the piston rod.
baling press cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards baling press cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the baling press cylinder guide is determined by the length of the stroke. Check the strength of baling press cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.
Before the baling press cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.
Cylinder la-50-70st What does that mean?
Full model should be CX-LA-50-70ST, thin block cylinder, radial mounting, bore 50, stroke 70.
How many boom cylinders, bucket rod cylinders and bucket cylinders are there in a small single-bucket excavator?
one for bucket, one for forearm, only one piece for a small excavator under the big arm, two pieces for medium and large excavator.